Login
Mineral resources of Poland> Rock raw materials and others> Ceramic clays
English SelectedChange language to Polish
  
    2022     
    2021     
    2020     
    2019     
    2018     
    2017     
    2016     
    2015     
    2014     
    2013     
    2012     

Ceramic clays

General information

Ceramic clays are generally represented by sedimentary clays of a marine or lacustrine origin and with minerals of the kaolinite and illite group as the major rock-forming components. The clays, also known as kaolinite rocks, are raw materials for the production of whiteware ceramics. From the technology process point of view, the fired products may be assigned to whiteware or stoneware. For the production of porcelite and faiance, there are used whiteware ceramic clays, characterized by: - the 60% of whiteness when fired at the temperature of 1,200°C; - the high bending strength after drying - minimum of 0.6 MPa. In turn, stoneware ceramic clays are characterized by a worse witheness degree, but they obtained a high bending strength, a large mechanical and chemical resistance and a low level of water absorption when fired – maximum of 5%.

Whiteware ceramic clays

Whiteware ceramic clays deposits occur only in Dolnośląskie Voivodeship. There are two types of deposits – the first are the Upper Cretaceous kaolinite clays forming interlayers in sandstones and are represented by the Bolko II and Ocice deposits; the second type are poorly coherent sandstones of kaolinite binder represented by the Janina I, Janina-Zachód and Nowe Jaroszowice deposits. The usable fraction is separated from these rocks by the water-washing and the obtained concentrate contains about 30% of kaolinite clay.

The ceramic clays deposits occurrence in Poland is presented on the map.

Table 1 shows the current state of the exploration and development of the above discussed deposits.

As of 31.12.2021, the anticipated economic resources of whiteware ceramic clays (faiance and porcelite) amounted to 60.21 million tonnes and decreased by 0.18 million tonnes (it means by 0.30%) in comparison with the previous year. The drop resulted from the exploitation and losses. Similarly to the previous years, Janina I deposit was the only whiteware ceramic clays deposit exploited in Poland – the output amounted to 173.98 thousand tonnes of the sandstones of kaolinite binder, that is by 12.06 thousand tonnes more than in 2020 (the growth by 7.45%). The economic resources of the raw material as of 31.12.2021 were equal 0.55 million tonnes and decreased by 0.18 million tonnes (24.66%) in comparison with the previous year – due to the exploitation and losses. List of deposits is presented in Table 2.

The figure given below shows changes in domestic resources and production of whiteware ceramic clays in Poland in the years 1989-2021.

Stoneware ceramic clays

Stoneware ceramic clays occur mainly in Świętokrzyskie and Dolnośląskie Voivodeships. Two deposits are located in Mazowieckie Voivodeship, while single ones in Łódzkie and Śląskie Voivodeships.

As of the end of 2021, the anticipated economic resources of stoneware ceramic clays amounted to 77.43 million tonnes and decreased in comparison with the previous year by 0.36 million tonnes (0.46%). The resources drop resulted from the exploitation and losses.

The anticipated economic resources within exploited deposits amounted to 6.74 million tonnes which accounted for 8.70% of the total anticipated economic resources. Almost all of these resources were covered by the detailed exploration (A+B, C1 categories), only in the Baranów deposit remained 3 thousand tonnes of resources explored in C2 category. The economic resources decreased by 0.35 million tonnes (10.70%) as a result of the exploitation and losses. They amounted to 2.92 million tonnes and accounted for 43.32% of the anticipated economic resources of the exploited deposits.

Table 3 shows the current state of exploration and development of these deposits.

In 2021, the exploitation of stoneware ceramic clays was carried out from three deposits. The total output was equal 238.64 thousand tonnes and grew by 4.10% (9.40 thousand tonnes) in comparison with 2020. The significant output increase (more than double) was recorded for the Baranów deposit – by 17.46 thousand tonnes. The exploitation level of the Zebrzydowa-Zachód deposit remained almost unchanged (a slight drop by 0.06 thousand tonnes, that is by 0.03%), whereas there was a visible decrease noted for the Rozwady 1 deposit (by 8 thousand tonnes, that is 50.00%). List of deposits is presented in Table 4.

The figure given below shows changes in domestic resources and production of stoneware ceramic clays in Poland in the years 1989-2021.


Other information

In The balance of prospective mineral resources of Poland the assessment of resources prospective for ceramic clays in Poland was updated*. The main criteria, adopted for determining the whiteware and stoneware ceramic clays deposits were: the deposit thickness (minimum of 2 m) and the overburden to the deposit thickness ratio (N/Z maximum of 2), in addition the raw material qualitative parameters: the clay minerals content (minimum of 40%), CaCO3 content (maximum of 2%) and the grains >2 mm content (maximum of 1%). Taking into account also such parameters as: the whiteness after firing, the bending strength or the water absorption after firing, the prognostic resources of whiteware and stoneware ceramic clays were assessed to be equal, respectively 127.20 million tonnes (within 3 areas in Dolnośląskie Voivodeship) and 230.41 million tonnes (within 9 areas: 2 in Świętokrzyskie Voivodeship and 7 in Dolnośląskie Voivodeship).


Prepared by: Marcin Tymiński

* Galos K., 2020 - "Iły biało wypalające się (white-firing clay, ball clay), kamionkowe (stoneware clay, ceramic clay) i ogniotrwałe (refractory clay, flint clay)". In: "Bilans perspektywicznych zasobów kopalin Polski wg stanu na 31.12.2018 r." (eds. Szamałek K., Szuflicki M., Mizerski W.): 335-329. PIG-PIB, Warszawa [in Polish].