Login
Mineral resources of Poland> Rock raw materials and others> Clay raw materials for lightweight aggregate production
English SelectedChange language to Polish
  
    2022     
    2021     
    2020     
    2019     
    2018     
    2017     
    2016     
    2015     
    2014     
    2013     
    2012     

Clay raw materials for lightweight aggregate production

General information and occurrence

Clay raw materials exploited in Poland for the production of light-weight aggregates may be assigned to 2 major types in a relation to their usability:

  • raw materials suitable for the production of keramsite (called as gliniec in Poland),
  • raw materials suitable for the production of agloporit (called as glinoporyt in Poland).

The raw materials used in the production of keramsite are characterized by an expansion during the thermal treatment. The process of the keramsite production involves a roasting of an appropriately prepared and granulated clay raw material in a temperature of 1,050-1,300°C. In the course of roasting the granules increase their volume due to the gases emanation in a soft pyroclastic mass and their external layer begins to melt forming a parched shard. The obtained porous, light-weight ceramic aggregate is characterized by a low soakability, high thermal insulating properties and a high resistance to several agents. The coefficient (the quotient of clay volume in a swollen state and volume in a state output) characterizing that property, that is the swelling coefficient, should be equal at least 2.5 and preferably 5.0 and more. To increase the raw material swell there are the technological additives used, such as: brown coal, diesel oil, alkalis. Usually, the raw material for the keramsite production can also be used for the production of building ceramics wares: brick, ceramic concretes etc. In this case, the roasting process is being carried out in the lower temperatures than during the keramsite production – below the swelling coefficient for a particular raw material.

The keramsite is used mainly in a building industry for the production of concretes and construction elements and as an insulating and draining material. It is also used in the road construction, horticulture and agriculture.

There have been 8 deposits of the raw materials for keramsite production documented in Poland: Budy Mszczonowskie (located in Mazowieckie Voivodeship), Gniew II (Pomorskie Voivodeship), Gołaszyn (Lubelskie Voivodeship), Nawra (Warmińsko-Mazurskie Voivodeship), Ruda (Podkarpackie Voivodeship), Uniejów (Łódzkie Voivodeship), Wierzchocin (Wielkopolskie Voivodeship) and Bukowo (Szczecin-Płonia) (Zachodniopomorskie Voivodeship).

Currently, the exploitation is being carried out only from the Quaternary dammed clays deposit – Gniew II. Previously, till 1995 the keramsite was also obtained from the Oligocene septarian clays and, since 2015, from the Pliocene clays in Budy Mszczonowskie town located in the Mazowsze area (nowadays, the production plant is closed, the clays deposit is temporarily exploited for purposes other than keramsite production).

The raw materials used for the production of the agloporit are not expanding in the course during the thermal treatment as their swelling coefficient is not higher than 1.0. The process of the agloporit production involves the roasting of a granulated mixture of the clayey raw material and easily combustible particles. The combustible particles in the result of roasting make the obtained material highly porous and relatively of a low density. In Poland, the agloporite was produced from the ’60s to ‘80s of the 20th century. For the production there were boulder clays, fluvic cambisols and the Pliocene clays used. The aggregates were used mainly in the building industry for the production of light concretes, concrete blocks and hollow bricks, however the production was abandoned due to the low raw material quality and high production costs.

The clay raw materials that can be used for the agloporit production are fairly common throughout the whole country. The quality requirements which should be matched by the raw material of this type are generally low. The majority of 33 documented deposits of the agloporit raw materials are represented by the Quaternary glacial loams and loesses (loess loams) and the remaining ones – Quaternary stagnant lake clays or Neogene clays.

The prospective of the usage of the raw materials for the agloporite production – according to their primary destiny – are nowadays highly unlikely due to the changes which took place within the building requirements, the building technology and as a result of the availability of better and cheaper building materials. The alternative ways of usage can be: cement industry or mass building sector, but it depends on the demand in a given region. Other, possible usage ways are: ecological building based on loams and the building materials production based on the loam (unfired). Such technologies and materials have been rarely used so far.

The so-called “fired shales” represent a material close to the agloporit. It is also being called “shale-porite from dumps”. This material originates in the result of spontaneous fires of stockpiles of the coal waste produced in hard coal mining operations. The fires turn clay-shales, which form a large part of the coal waste stockpiles, into a strong ceramic material. “Fired shales” are available at the Polish market as aggregates usable in the building and road construction. They are treated as a reused product from waste and thus data on their resources and supplies are omitted from “The balance…”.

Resources and output

Table 1 shows the current state of the exploration and development of these deposits. The anticipated economic resources as of 31.12.2022 amounted to 165.673 million m3 (about 331.346 million tonnes) from which the resources for the keramsite production were equal 39.528 million m3 (about 79.056 million tonnes) – 23.9% of the total resources. The anticipated economic resources for the agloporite production amounted to 126.146 million m3 (about 252.292 million tonnes) – 76.1% of the total resources.

In 2022, there were 2 new documentations with recalculated resources (supplements) for the clay raw materials for agloporite production approved: the loesses deposit Dębówka in Lubelskie Voivodeship and the Quaternary loams, sands and clays deposit Dębica in Warmińsko-Mazurskie Voivodeship:

  • Dębówka – the deposit boundaries were changed, excluding areas which owners want to develop in other way than the exploitation and areas occupied by the road (-0.906 million m3);
  • Dębica – the supplement was elaborated to the resources settlement and crossing out the deposit from the registry (-1.055 million m3). It resulted from i.a.: type and low quality of the raw material, complex geological structure with glacitectonic origin, location within the buffer zone of the Elbląg Highland Landscape Park and of the Elbląg Highland Protected Landscape Area. The deposit has not been exploited so far.

The resources drop is equal 1.961 million m3 in total.

In 2022, there were 2 deposits exploited: Gniew II located in Pomorskie Voivodeship and Budy Mszczonowskie in Mazowieckie Voivodeship. The raw material output amounted to 0.109 million m3, including: for keramsite production 0.102 million m3 (from the Gniew II deposit), for other purposes 0.007 million m3 (from the Budy Mszczonowskie deposit). In comparison with 2021, the output (in total) dropped by 0.003 million m3, that is by 2.7%. The output of the raw material for keramsite production (from the Gniew II deposit) decreased by 0.010 million m3 (8.7%).

Deposits of clay raw materials for the lightweight aggregate production (together with building ceramics raw materials) are presented on the map.

The economic resources as of the end of 2022 were equal 1.835 million m3 (about 3.670 million tonnes). The economic resources are documented within the mining areas of the Gniew II deposit and Budy Mszczonowskie deposit.

The prognostic resources (category D) of the raw materials for the keramsite production within 5 areas were assessed at 38.081 million m3*. In turn, the prognostic resources for the agloporit production were assessed at 12,138 million m3 within 4 prognostic areas. There were also the prospective areas (category D2) identified.


Prepared by: Wojciech Szczygielski

* Szczygielski W., Walentek I., 2020 - "Surowce ceramiki budowlanej (building ceramics raw materials), surowce do produkcji kruszyw ceramicznych i cementu (mineral raw materials for production of clay aggregates and cement clinker)". In: "Bilans perspektywicznych zasobów kopalin Polski wg stanu na 31.12.2018 r." (eds. Szamałek K., Szuflicki M., Mizerski W.): 239-257. PIG-PIB, Warszawa [in Polish].